P152D

2B0D - P152D

Information saved in
DME

Fault code
2B0D - P152D

Fault text
Bank 1 idle-actuator monitoring system

Fault description


Condition for fault identification
Test condition:
(egas_can_ed_tsperr_lls == 0) and CAN OK
Terminal condition: Terminal 87
Voltage condition:
ub > K_EGAS_CAN_ED_Plus_Min

Condition for fault memory entry
Error detection received via CAN

Action in service
1. Delete stored DTCs from error memory, idle actuator
system test
2. Check power supply to idle actuator 1
3. Replace idle actuator 1

Fault effect and breakdown warning
DSC lamp / CC message / engine speed limited to 5000 rpm
/ reduced power / engine start may be possible only with use
of accelerator pedal

Driver information
Warning light:
29-Engine malfunction

Service instruction
none