Replacing Front Ride-Height Sensor

37 14 511 - Replacing front ride-height sensor





Important!
Observe safety instructions 00 .. ... Lifting Vehicle With A Lifting Platform for raising the vehicle.





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge)!





Necessary preliminary tasks:
- Remove underbody protection
- If necessary, remove right steering gear cover





Disconnect plug connection (1).
Release nut (2) and disconnect jointed rod.
Tightening torque 37 14 7AZ Electric Components.
Release screws (3) and remove ride-height sensor from bracket.

Installation Note:
Sensor lever must point from ride-height sensor to right front wheel.
Tightening torque 37 14 6AZ Electric Components.





After installation:
- Check headlight adjustment Adjusting Headlights, correct if necessary