2DC1

2DC1 - U0111

Information saved in
DME

Fault code
2DC1 - U0111

Fault text
No message from the power module, DME receiver,
CAS/PM transmitter

Fault description
No message from power module

Condition for fault identification
Test condition:
Message query for timeout
Terminal condition: 800 ms after Terminal 15
Voltage condition:
battery voltage >10 V

Condition for fault memory entry
5 / 25 sec.

Action in service
- Check PWML control module
- Check CGM Central Gateway Module / K CAN
- Measure bus resistance
- Check wiring harness
=> Replace ECU as indicated

Fault effect and breakdown warning
none

Driver information
Warning light:
MIL on in 2nd DC, US version only

Service instruction
none