Removing and Installing/Replacing Drive for Seat Tilt Adjustment (Comfort Seats in Rear Compartment)

67 31 610 - Removing and installing/replacing drive for seat tilt adjustment (comfort seats in rear compartment)

Remove rear seat padding completely Removing and Installing Padding for Left or Right Rear Seat.





Disconnect plug connection (1). If necessary, cut through cable tie.
Release screws (2).
Detach drive for seat tilt adjustment (3) from drive shaft (4) and feed out in direction of arrow.

Installation:
Make sure drive shaft (4) is correctly seated.





Replacement:
Initialize Testing and Inspection drive unit for seat tilt adjustment.