Air Injection Pump: Service and Repair

11 72 000 - Removing and installing/replacing air pump (N62)





Remove upper section of intake filter housing.
Release retaining screws on coolant expansion tank.
Remove suction filter housing.
Remove raw air housing.





Unlock and disconnect pressure and suction lines (1).
Loosen screws (2).
Loosen screw (3).





Remove front splash guard.
Remove trim panel at bottom right.





Unlock plug (1) and remove.
Unscrew bolt (3).
Remove air pump (2).





Unscrew nuts.
Unclip plug (1).
Remove holder from air pump.