Intake Manifold: Service and Repair

11 61 050 - Removing and installing intake air manifold (N62)





Remove acoustic cover.
Remove design cover.
Remove center of bulkhead.
Remove intake hose.
Remove injection pipe Service and Repair.
On rear side of manifold, unlock and disconnect plug on differential pressure sensor and on servomotor.





Unlock and detach vent hose (1).
Remove cable from holder.





Unfasten screws.
Remove intake air manifold (2) upwards with aid of a second person.





Installation:
Clean sealing faces (1) on intake air manifold (2).





Installation:
Clean sealing face (1) on left and right.
Replace gasket on left and right.





Assemble engine.
Check air intake system for leaks.