51 16 210 - Removing and installing/replacing Sport switch trim (SPORT button)

51 16 210 - Removing and installing/replacing Sport switch trim (SPORT button)





Special tools required:
- 00 9 341





Unclip trim for Sport switch (1) with special tool 00 9 341 from fastening points (3).

Warning!
When using the special tool, make sure that the decorative trims are not damaged.





Pull back trim (1) and unclip gaiter (2) from below at fastening points (3).

Feed out trim (1) upwards over gaiter (2), disconnect associated plug connections and lift out trim (1).





Installation Note:
Make sure retainers (1) are correctly seated in appropriate mounts of trim for preselector lever (2).

Replacement:

If necessary, remove driving dynamics switch Service and Repair.