51 71 412 Removing and Installing Rear Spoiler

51 71 412 - Removing and installing rear spoiler





Lever out seal plug (1).
Release screws (2), tightening torque 51 71 2AZ Specifications.
Feed rear spoiler towards rear out of rear lid.





Installation:
Fit rear spoiler (1) so that mounts (2) can slide into associated guides (3).





Raise rear spoiler slightly as shown.
Unfasten plug connection (1) and disconnect.
Disconnect hose (2).
Remove antenna amplifier cover (3) in upwards direction.

Installation:
Make sure antenna amplifier cover (3) is exactly seated.

Unfasten plug connection (4) and disconnect.
Remove rear spoiler in upwards direction from rear lid and set down on a clean surface.