Tire Pressure Module: Service and Repair

36 11 105 - Removing and installing RDC (Tire Pressure Control) control unit





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Note:
When replacing the control unit, also attach the warning notice to the rear lid (1) E60 and (2) E61 or check that one is present.





Necessary preliminary tasks:
- Disconnect battery negative lead Disconnecting and Connecting Battery Negative Lead
- Remove luggage compartment floor trim 51 47 101 Removing and Installing/Replacing Luggage Compartment Floor Trim Panel
- If necessary, remove spare wheel
- Remove luggage compartment recess panel





Take off cover for control units (1).

Installation Note:
Make sure cover for control units (1) is correctly seated on locating pins (2).





Remove RDC control unit (1) from device holder.
Disconnect plug connection (2).





Replacement:
- Carry out programming/coding Programming and Relearning