16 12 010 Removing and Installing/Replacing Carbon Canister (DM-TL)

16 12 010 - Removing and installing/replacing carbon canister with DM-TL

DM-TL = diagnosis module-tank leakage





Necessary preliminary tasks:
- Remove rear right wheel Removing or Installing Front or Rear Wheel.
- Remove right wheel arch trim.





Unlock and detach lines (1) to (3).
(1) - Scavenging air line
(2) - Vent line to fuel tank
(3) - Evaporation line





Unlock and disconnect plug (1).
Release screws and remove carbon canister with DM-TL towards bottom.
Tightening torque 16 13 2AZ 16 13 Tank Ventilation.