Front Seat, Sports, Electric

67 66 013 - Removing and installing/replacing drive unit for lumbar support on left or right front seat (active seat)





Cut through cable ties (1).
Set down drive unit for lumbar support (2) with jacket towards bottom.





Cut through cable tie (1) on jacket of drive unit for lumbar support (2).
Disconnect plug connection (3).





Detach hose (1) in direction of arrow.

Note:
If firmly seated, gently heat hose (1) on drive unit for lumbar support (2).

Installation:
Make sure hose (1) is laid without kinks.

Remove drive unit for lumbar support (2).

Replacement:
Pull drive unit for lumbar support (2) out of jacket (3).