Front Seat, Normal, Electric

67 66 010 - Removing and installing/replacing lumbar support drive mechanism on front seat, left or right





Necessary preliminary tasks:
- Remove rear panel on front seat backrest Removing and Installing/Replacing Rear Panel on Left or Right Front Seat Backrest (Normal/Electric).





Cut through cable tie (1).
Pull drive unit for lumbar support (2) with jacket slightly out of backrest frame (3).





Cut through cable tie (1) on jacket of drive unit for lumbar support (2).





Disconnect plug connection (1).
Detach hose (2).

Note:
If firmly seated, gently heat hose (2) on drive unit for lumbar support (3).

Installation:
Make sure hose (2) is laid without kinks.

Remove drive unit for lumbar support (3).

Replacement:
Pull drive unit for lumbar support (3) in direction of arrow out of jacket (4).