Sunroof / Moonroof Motor: Service and Repair

67 61 005 - Removing and installing/replacing drive unit with gearing for slide/tilt sunroof





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Necessary preliminary tasks:
- Remove front roofliner trim 51 44 ... - Removing and installing front roofliner trim





Note:
Secure drive unit with gearing for slide/tilt sunroof (2) against falling out.

Release screws (1), tightening torque 54 13 1AZ [1][2]Specifications.

Lower drive unit with gearing for slide/tilt sunroof (2).

Note:
Screws (1) are microencapsulated.

Unlock plug connection (3), disconnect and remove drive unit with gearing for slide/tilt sunroof (2).





Installation Note:
Insert gear wheel (1) of drive with gear for actuating slide/tilt sunroof (2) in gear teeth.





Installation Note:
- Initialize slide/tilt sunroof Testing and Inspection.





Replacement:
Carry out programming/coding Programming and Relearning.

Important!
There is a risk of permanent battery discharge if programming/coding is not carried out!