63 12 896 Replacing Drive Unit for Right Adaptive Headlight (from 03/2007)

63 12 896 - Replacing drive unit for right adaptive headlight (from 03/2007)





Warning!
Version with xenon headlights: Danger to life due to high voltage! Therefore, before removing, disconnect all components from the power supply (lighting system and ignition off).
Work on the entire xenon lighting system (ignition unit, control unit and lamp) may only be carried out by specialist personnel.





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Necessary preliminary tasks:
- Remove wheel arch cover front section 51 71 038 Removing and Installing/Replacing Front Left or Right Wheel Arch Cover (Front Section)





Undo screws (1) of control unit adapter (2). Tightening torque 63 12 6AZ Specifications.
Pull control unit adapter (2) downward from headlight (3) to remove.

Installation Note:
Make sure control unit adapter (2) is correctly seated on headlight (3).





Disconnect plug connection (1).
Release screws (2). Tightening torque 63 12 8AZ Specifications.

Installation Note:
Replace damaged seal.
Ensure seal (3) is seated correctly.





Carry out vehicle programming/coding Programming and Relearning.