Oil Pressure Sensor: Service and Repair

12 61 280 Removing And Installing/replacing Oil Pressure Sensor (N52, N52K, N51, N54, N53)







Necessary preliminary tasks:
- Turn off ignition
- N52, N52K, N51, N53 only:
- Remove ignition coil cover
- N54 only:
- Remove intake silencer housing







WARNING:
Scalding hazard.

Only perform this task on an engine that has cooled down.







Installation location:
Oil filter housing, front left.

Engine oil may emerge when oil pressure sensor is replaced; have a cleaning cloth ready.







Unlock plug (1) and remove.

Release oil pressure sensor (2).

Tightening torque 12 61 1AZ.

Installation:
Check engine oil level, top up engine oil if necessary.