54 34 330 Removing and Installing/Replacing Front Cowl Panel Seal Rail

54 34 330 - Removing and installing/replacing front cowl panel seal rail





Necessary preliminary tasks:
- Remove cowl panel trim 54 34 127 Removing and Installing/Replacing Trim For Cowl Panel





Warning!
Soft top becomes pressureless without a warning signal.
For all work, secure soft top with a suitable support tool against collapsing.
Ensure Convertible top is supported in the middle.
Ignition must remain switched off during the repair work.
Failure to comply with this instruction may result in the hydraulic valves incurring preliminary damage.





Release screws (1).
Remove cowl panel seal with clamping strip.
Pull cowl panel seal off clamping strip.