Removing and Installing / Replacing Side Trim Panel, Footwell, on A-Pillar, Right

51 43 075 Removing And Installing / Replacing Side Trim Panel, Footwell, On A-pillar, Right

Necessary preliminary tasks:
- Remove front entrance cover strip (inside)
- Remove trim for instrument panel, bottom left







Detach mucket (1) in area of panel (3).
Release screw (2).
Unclip panel (3) in direction of arrow at retaining points (4) and remove.







Installation:
If necessary, lever out clips (1) remaining in bores.
If necessary, replace faulty clips (1).
Make sure lugs (2) are correctly seated in associated mountings.
Position panel (3) preinstalled with clips (1) on associated bores and clip into place.