PROM - Programmable Read Only Memory: Technical Service Bulletins

• Customer Interest
  • Computer/Controls - MIL ON And DTC's 2F99, 10B008 Stored
  • Engine Controls - DTC 2A1A/MIL ON While Driving
  • Engine Controls - MIL ON/DTC's 2A15/2A16 Set
  • Engine Controls - Erroneous CBS4 Oil Service Forecast
  • Engine Controls - MIL ON, DTC 2A38 Stored
  • Engine Controls - DTC's 2FA3/2FA4/Driveability Concerns
  • Engine Controls - MIL ON/Fault Code 2EF4 Set
  • Engine - Runs Poorly With Camshaft/VANOS Codes Set
  • Engine Controls - Loss of Power/Long Crank Time
  • Engine Controls - False Low Oil Level Mssg. Displayed
  • Engine A/T Controls - Delayed Shifts/Low Power
  • A/T Controls - GM6 Failsafe Mode/Code 56BD Stored
  • Bluetooth(R) - Call Displays as Active After Ended
  • Engine Controls - Trailer Lights Inop After AHM Retrofit
• All Technical Service Bulletins
  • Computer/Controls - MIL ON And DTC's 2F99, 10B008 Stored
  • Computers, Controls - Programming VS Veh. Data Status
  • Engine Controls - DTC 2A1A/MIL ON While Driving
  • Engine Controls - MIL ON/DTC's 2A15/2A16 Set
  • Engine Controls - Erroneous CBS4 Oil Service Forecast
  • Engine Controls - MIL ON, DTC 2A38 Stored
  • Engine Controls - DTC's 2FA3/2FA4/Driveability Concerns
  • Engine Controls - MIL ON/Fault Code 2EF4 Set
  • Engine - Runs Poorly With Camshaft/VANOS Codes Set
  • Engine Controls - Loss of Power/Long Crank Time
  • Progman(R) - Programming/Coding/Individualization
    • Overview
    • General_Rules_For_Programming
    • Procedure_A_Module_Replacement
    • Procedure_B_Software_Update
    • Procedure_C_Troubleshooting
      • Index
      • Introduction
      • Section I: Preparing A Progman Session
      • Section II: Progman Session Initialization
      • Section III: Before Programming/Coding
      • Section IV: After Programming Coding
      • Illustrations and Table
    • Procedure_E_Coding
  • Engine Controls - False Low Oil Level Mssg. Displayed
  • Engine A/T Controls - Delayed Shifts/Low Power
  • A/T Controls - GM6 Failsafe Mode/Code 56BD Stored
  • Bluetooth(R) - Call Displays as Active After Ended
  • Computers/Controls - 'Retrofit' Update Programming
  • Engine Controls - Trailer Lights Inop After AHM Retrofit