Removing and Installing/Replacing Window Cavity Cover Strip on Inner Front Door

51 21 330 - Removing and installing/replacing window cavity cover strip on inner front door





Necessary preliminary tasks:
- Remove front door trim panel Removing and Installing Left or Right Front Door Trim Panel





Important!
Cover strip comes in one part and runs up to bottom edge of door.

Unclip clips (1 and 2).

Detach cover strip (3) in direction of arrow from front door.

Installation:
If necessary, replace faulty clips (1 and 2).





Detach cover strip (1) towards top.

Installation:
If necessary, replace faulty clips (2).





Installation:
Make sure inner cover strip (1) is in correct installation position in relation to outer cover strip (2) and door window glass (3).





Installation:
Catches on cover strip (1) must not be damaged.





Installation Note:
Coat cover strip (1) with water before fitting.
Start with installation at front.