Suspension Control Module: Service and Repair

37 15 055 - Removing and installing/replacing EDC control unit (M model)





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Necessary preliminary tasks:
- Remove trim for instrument panel, bottom left 51 45 181 Removing and Installing/Replacing Bottom Right Trim For Instrument Panel
- Remove footwell side trim panel on A-pillar, right Removing and Installing/Replacing Side Trim Panel, Footwell, on A-Pillar, Right





Press floor trim at front right to one side.
Open cutout in insulating mat (shown with dotted line) and release nut (1).
Disconnect plug connections (2).
Unscrew nut (3).
Slide control unit (4) with bracket upwards and remove sideways.
Replacement only:
Remove control unit (4) from bracket.





Replacement:
Carry out programming/coding Programming and Relearning.