51 45 177 - Removing and installing/replacing panel for active knee protector on left

51 45 177 - Removing and installing/replacing panel for active knee protector on left





Warning!
Read and comply with [1][2]Safety Regulations for Handling Components with Gas Generators safety regulations for handling airbag modules and pyrotechnical belt tensioners.
Incorrect handling can activate airbag and cause injury.





Necessary preliminary tasks:
- Remove luggage compartment floor trim 51 47 101 Removing and Installing/Replacing Luggage Compartment Floor Trim Panel
- Disconnect negative battery cable Instructions for Disconnecting and Connecting Battery
- Remove trim panel for pedal assembly 51 45 185 Removing and Installing/Replacing Panel For Pedals





Release screws (1) and lower panel for left active knee protection (2).

Installation Note:
Replace screws.
Tightening torque 72 12 05AZ Airbag Modules.

Unlock Unlocking/Locking Airbag Plug Connections plug connection (3) of panel for left active knee protection (2), disconnect and remove panel for left active knee protection (2).





Important!
Always replace panel for active knee protector on left complete.
Do not carry out any repairs on the panel for the left active knee protection.