Discharge Air Temperature Sensor / Switch: Service and Repair

64 11 916 - Replacing temperature sensor for cold-air distributor





Necessary preliminary tasks:
- Remove audio system controller Removing and Installing/Replacing Audio System Controller /
remove Car Communication Computer Removing and Installing/Replacing Car Communication Computer





Disconnect plug connection (2).

Important!
Do not bend temperature sensor for cold-air distributor (1).

Turn temperature sensor for cold-air distributor (1) counterclockwise, feed out towards bottom and remove.

If necessary, release screws (3) and (4).
Pull back center function carrier (5) at top slightly.

Installation:
Make sure temperature sensor for cold-air distributor (1) is correctly seated.