Removing and Installing/Replacing Servodrive For Defrosting Flap

64 11 875 - Removing and installing/replacing servodrive for defrosting flap





Necessary preliminary tasks:
- Remove trim panel for pedal assembly 51 45 185 Removing and Installing/Replacing Panel For Pedals.
- Remove Service and Repair air distributor in footwell and heating duct in rear compartment on left.





Press lock (1) and pull out servodrive for defrosting flap (2) in direction of arrow.
Unfasten plug connection (3) and disconnect.

Installation:
Follow repair instruction "Installing servodrive Installing Servodrive".
Servodrive for defrosting flap (2) must snap audibly into place.