11 00 091 Installing Replacement Engine

11 0 091 - Installing replacement engine (S85)





Necessary preliminary tasks:
- Remove and install engine Removing and Installing Engine.





Note:
Use a 5W-30 engine oil for the running-in procedure in a replacement engine.
Running-in engine oil must be changed at 2000 km for a 10W-60 engine oil incl. engine oil filter.





Installation:
Modifying check valves, refer to SI-11 01 05 Fault memory entries in DME.

In engines where it is not possible to connect check valves, replace the vacuum-controlled check valves with self-opening check valves.

Vacuum lines will then no longer be required.