Replacing One Front Pulse Generator

34 52 525 - Replacing one front pulse generator





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Note:
Read and comply with General Information Service and Repair.
Observe safety instructions on raising the vehicle 00 .. ... Lifting Vehicle With A Lifting Platform.





Open plug housing (1), pull plug connection (2) out of bracket and disconnect.
Pull cable with rubber grommet out of bracket on spring strut.

Installation:
Ensure proper locking of plug connector and proper seating of rubber grommets.





Release hexagon socket head cap screw (1) and pull wheel speed sensor out of bore.

Installation Note:
Tightening torque 31 51 6AZ 34 51 Slip Control System (ABS, ASC+T, DSC).
Clean bore hole for pulse generator and grease with Staburags NBU 12/K lubricating grease (refer to BMW Service Operating Fluids).