Cowl Moulding / Trim: Service and Repair

51 13 115 - Removing and installing/replacing cowl panel cover





Necessary preliminary tasks:
- Remove both windshield wiper arms Removing and Installing Both Windshield Wiper Arms
- Remove lower microfilter housing section Removing and Installing/Replacing Left or Right Microfilter Housing Lower Section on left and right





Release clip on left/right.
Turn quick-release fasteners (2) approx. 90° counterclockwise.

Note:
The fastener is closed if the arrow tips point to each other.

Unscrew bolt (1).

Remove cowl panel cover towards top.

Installation:
Tighten down screw (1) to tightening torque 51 13 5AZ 51 13 Trim Parts, Covers, Handle Trim.
Check cover (3) for correct seating.
Tighten quick-release fasteners (2) from the middle.