Entertainment System Control Module: Service and Repair

65 50 011 - Removing and installing (replacing) video module for on-board monitor





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Necessary preliminary tasks:
- Disconnect battery negative lead Instructions for Disconnecting and Connecting Battery
- Remove luggage compartment wheel arch trim on left .





Note:
Follow instructions for handling optical fibers 61 00 ... Notes on Handling Optical Fibers.





Release screws (1).
Pull holder (2) with devices forwards slightly in direction of arrow.





Unfasten plug connection (1) and disconnect.

Installation Note:
Do not mix up antenna connectors (2).

Mark antenna plugs (2) and disconnect.

Release screws (3).
Feed video module for on-board monitor (4) out of holder (5) and remove.





Replacement:
Carry out programming/coding Programming and Relearning.