2719 - P0394 (DME)

2719 - P0394

Information saved in
DME

Fault code
2719 - P0394

Fault text
Bank 2 exhaust camshaft position sensor

Fault description


Condition for fault identification
Test condition:
Engine running
Terminal condition: Terminal 87
Voltage condition:
ub > K_ED_PlusMin

Condition for fault memory entry
More than K_VAN_RAD_Max pulses within one working
cycle, 10 consecutive working cycles

Action in service
1. Check plug and wiring harness for Bank 2 camshaft
position sensor
2. Check gap between sensor and reluctor
3. Replace Bank 2 camshaft position sensor.

Fault effect and breakdown warning
Reduced power / MIL lights up after engine runs 2x

Driver information
Warning light:
No

Service instruction
none