Removing and Installing/Replacing Rear Stabilizer

33 55 000 - Removing and installing/replacing rear stabilizer





Important!
Observe safety instructions on raising the vehicle 00 .. ... Lifting Vehicle With A Lifting Platform.





Necessary preliminary tasks:
- Remove complete rear axle carrier Removing and Installing Complete Rear Axle Carrier
- Remove stabilizer link on both sides from stabilizer Replacing Stabilizer Links for Stabilizer





Release screws (1).
Remove stabilizer (2).

Installation Note:
Check rubber mount on both sides Replacing Both Rubber Mounts for Stabilizer Mounting, replace if necessary.
Tightening torque 33 55 3AZ Rear Axle - Stabilizer Bar.





Replacement:
Remove rubber mount on both sides from stabilizer Replacing Both Rubber Mounts for Stabilizer Mounting.





After installation:
- Version with ride-height control: Activate and fill air suspension system Draining/Filling Air Spring System
- Adjusting parking brake Adjustments