51 13 082 - Replacing trim grill for heater air inlet

51 13 082 - Replacing trim grill for heater air inlet





Necessary preliminary tasks:
- Remove trim grille for heater air inlet 51 13 081 Removing and installing trim grille for heater air inlet





Sever holders (1) on trim grill (2) until flush.





Place lower section (2) on trim grill (1).
Press on lock washers (4) with a TORX E4 socket (5).
Shorten all plastic pins (3) down to measurement (A).
A = - 2 mm

Important!
Measurement (A) for center plastic pin in direction of travel at front must only be 1 mm (risk of damage).