P1596

2DE6 - P1596

Information saved in
DME

Fault code
2DE6 - P1596

Fault text
DME2: Local CAN, DME/DME2: communication

Fault description
Local CAN, DME/DME2: Communications

Condition for fault identification
Test condition:
determine whether the following message
DME_M_S_1,DME_M_S_2,DME_M_S_T1 is present
Terminal condition: 800 ms after Terminal 15
Voltage condition:
battery voltage >10 V

Condition for fault memory entry
500 ms

Action in service
if 2 errors are present (bus off / CAN timeout)
=> Check local CAN
Check power supply
=> Replace interacting control module as indicated

Fault effect and breakdown warning
If master is affected vehicle will fail to start

Driver information
Warning light:
MIL on in 2nd DC

Service instruction
none