P0560

2F8A - P0560

Information saved in
DME

Fault code
2F8A - P0560

Fault text
DME2: Battery voltage

Fault description
Battery voltage

Condition for fault identification
Test condition:
Voltage measurement
7V at Pin 1-08 error is entered during spring test following
terminal status change
Terminal condition: B_kl 15 changes
Voltage condition:
none

Condition for fault memory entry
none

Action in service
Check wiring harness
Replace ECU as indicated

Fault effect and breakdown warning
Engine runs in throttle-valve emergency default mode

Driver information
Warning light:
MIL on in 2nd DC, US version only

Service instruction
none