Replacing Water Valve for Heater (Automatic A/C High)

64 11 274 - Replacing water valve for heater (automatic A/C High)





Warning!
Danger of scalding!
Only perform this work after engine has cooled down.





Disconnect plug connection (1).

Installation Note:
Ensure correct cable routing.

Pull out heater valve (2) upwards slightly.





Release hose clamps (1) and detach water hoses.
Remove water valve for heater (2).





Installation Note:
Make sure water valve (1) is correctly seated in grommets (2) and rubber mount (3).
If necessary, replace grommets (2) and rubber mount (3).

Filling and bleeding the cooling system, Venting Cooling System and Checking for Water Leaks