Sunroof / Moonroof Motor: Service and Repair

67 61 005 - Removing and installing (replacing) drive with gear for actuating slide/tilt sunroof





Necessary preliminary tasks:
- Remove front console insert Service and Repair





Note:
Secure drive with gear for actuating slide/tilt sunroof (2) against falling out.

Release screws (1).

Remove drive with gear for actuating slide/tilt sunroof (2) and disconnect plug connection (3).

Installation:
Replace screws (1).





Installation:
Insert gear wheel (1) of drive for actuating slide/tilt sunroof (2) in gear teeth (3).





Installation:
Initialize drive for actuating slide/tilt sunroof Programming and Relearning.





Important!
Replacement:
Observe notes and instructions in HLI VK6229.
(PuMA measure)





Replacement:
Carry out programming/coding Programming and Relearning.

Important!
There is a risk of permanent battery discharge if programming/coding is not carried out!