51 11 156 Removing and Installing Front Bumper Trim

51 11 156 - Removing and installing front bumper trim





Necessary preliminary tasks:
- Remove both protective strips
- Remove baseplate Service and Repair for number/license plate
Build date up to 03/05:
- Remove both fog lamps 63 17 060 Removing and Installing/Replacing Left or Right Front Fog Lamp
Build date from 03/05:
- Remove both side grills





Release screws (1) or clip (1) on left/right.





Release screws (1).

Important!
Bumper trim must not be pulled out sideways (risk of damage).

Remove bumper trim straight towards front with aid of a 2nd person.

If necessary, disconnect additional plug-in contacts and feed out cable.

Installation:
Observe gap dimensions.