Integrated Control Relay Module: Service and Repair

12 52 005 - Removing and installing/replacing integrated supply module (N62, N62TU)





Necessary preliminary tasks:
- Read out fault memory with MoDiC or BMW DIS; if necessary, work through test schedules
- Switch off ignition
- Follow instructions for disconnecting and connecting battery
Disconnect battery
- Remove right fresh air duct Service and Repair

Important!
Follow instructions for removing and installing control units Service and Repair





Unlock stopper (1) in direction of arrow.
Unfasten screws.
Lift out cover (2).





Unlock and detach plug connections on supply module.
Unlock supply module (1) and remove towards top.





Now clear the fault memory.