Brake Pedal Assy: Service and Repair

35 11 000 - Removing and installing complete bearing block for foot pedal





Necessary preliminary tasks:
- Remove pedal trim 51 45 185 Removing and Installing/Replacing Panel For Pedals
- Vehicles with electric steering column:
- Remove electric steering column drive Removing and Installing/Replacing Drive Unit for Electric Steering Column Adjustment
- Vehicles with manual transmission:
- Remove clutch pedal Service and Repair
- Remove clutch master cylinder Service and Repair

Important!
After completion of work, carry out function check.





Unfasten plug connection (1).
Remove locking clip (2) and disengage and pull out locking pin.
Release nuts (3) and remove bearing block.

Installation:
Replace self-locking nuts.
Tightening torque 35 11 1AZ 35 11 Pedal Assembly Console.