Instruments - On-Board Computer Functions Won't Display

SIB 62 03 07
Instruments

May 2007
Technical Service

This Service Information bulletin supersedes S.I. B62 03 07 dated January 2007.

[NEW] designates changes to this revision

SUBJECT
On-Board Computer Functions Cannot Be Displayed

MODEL
E90, E91, E92 (3 Series)

SITUATION
When using the BC (on-board computer) button to scroll through the BC functions in the lower display field of the Instrument Cluster, it is only possible to scroll to the blank display and no further. This occurs only if the DCC (Dynamic Cruise Control) or ACC (Active Cruise Control) indicator in the upper display field of the instrument cluster is activated by the steering column lever.

CAUSE
Instrument cluster software

Program the complete vehicle per SI B09 05 01 (Coding, Individualization, Programming), Procedure B, using Progman V25.00.00 or higher.

[NEW] WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty.

Defect Code: Refer to KSD

Labor Operation: Refer to KSD

Labor Allowance: Refer to KSD





Disclaimer