27 21 030 Replacing Radial Shaft Seal For Front Axle Output (ATC 300)

27 21 030 Replacing Radial Shaft Seal For Front Axle Output (ATC 300)

Special tools required:







IMPORTANT:
After completion of work, check transmission oil level.
Use only the approved gear oil in this transfer case.







Necessary preliminary tasks:
- Remove front propeller shaft.







Lever output flange (1) out of housing with screwdriver (2).
Lever radial shaft seal out of housing with a suitable tool.

IMPORTANT: Do not damage housing.







Drive in radial shaft seal with special tool 27 1 450.