27 21 010 Replacing Radial Shaft Seal For Drive Flange (ATC 300)

27 21 010 Replacing Radial Shaft Seal For Drive Flange (ATC 300)

Special tools required:







IMPORTANT:
After completion of work, check gear oil level and top up if necessary.
Use only approved gear oil in this transfer box.







Necessary preliminary tasks:
- Remove transfer box.







Drive a hole into radial shaft seal (1) using a center punch (2).


IMPORTANT: Do not use a drill as drillings may result in transmission malfunction.







Screw special tool 23 0 490 into radial shaft seal.
Drive out radial shaft seal (1) with impact weight (2).







Installation:
Coat sealing lips of new radial seal with clean transmission oil.
Drive in radial shaft seal with special tool 27 1 430.







Add final details to vehicle.
Check oil level.
Check transmission for leaks.