24 13 013 Replacing Output Flange Shaft Seal (GA6HP19Z)

24 13 013 Replacing Output Flange Shaft Seal (GA6HP19Z) AWD

Special tools required:







IMPORTANT:
After completion of repair work, check transmission oil level.
Use only the approved transmission oil.
Failure to comply with this requirement will result in serious damage to the automatic transmission.







Necessary preliminary tasks:
- Remove transfer box







Drive a hole into radial shaft seal (1) using a centre punch.

IMPORTANT: Do not use a drill as drillings may result in transmission malfunction.

Thread special tool 23 0 490 into radial shaft seal (1).
Drive out radial shaft seal (1) with impact weight (2).







Installation note:
Coat sealing lips of new radial shaft seal with clean transmission oil.
Drive shaft seal firmly home with special tool 244310.