Removing and Installing/Replacing Brake Master Cylinder For Dsc (MK60)

34 31 505 Removing and installing/replacing brake master cylinder for DSC (MK60)

DSC (Dynamic Stability Control)

Note: Read and comply with General Information.

After completing work:
Bleed brake system.
Remove expansion tank.
Remove pressure sensor "V" for DSC.
Remove pressure sensor "H" for DSC.





Unfasten brake lines (1).

Installation:

Unfasten hex nuts (2).
Withdraw brake master cylinder (3) from brake booster (4).
Installation:
Replace self-locking nuts.






Installation:
Replace sealing ring in O-shape (1).





Installation:
When inserting the brake master cylinder (2) into the brake booster (1), make sure the pressure rod of the brake booster (1) and that of the brake master cylinder (2) are on one level.