Removing and Installing/Replacing Pressure Sensor "V" For Dsc

34 52 560 Removing and installing/replacing pressure sensor "V" for DSC

Note: Read and comply with General Information.

Important: After replacing the pressure sensor, carry out an adjustment with DIS (Diagnosis and Information System) under menu item "Service functions".

After completing tasks, bleed brake system.





Apply pedal prop and depress brake pedal slightly. This prevents brake fluid from emerging from the expansion tank and air from entering the brake system after the brake lines have been detached.
Disconnect brake pipe from connection with brake hose.





Release and remove pipe (1) from hydraulic unit (2) and from brake master cylinder (3).






Unfasten plug connection (1).
Detach pressure sensor (2) from brake master cylinder.