Removing and Installing/Replacing Left or Right Rear Brake Caliper
34 21 745 Removing and installing/replacing left or right rear brake caliperRemove rear wheel.
After completing tasks, bleed brake system.
Apply pedal prop and depress brake pedal slightly. This prevents brake fluid from emerging from the expansion tank and air from entering the brake system when the brake lines are opened.
Release screws (1).
Disconnect brake hose (2).
Unfasten brake hose on connection point to brake line.
Right side:
Disconnect plug connection for brake lining sensor.
Pull off fist caliper towards rear of vehicle.
Installation:
Install brake hose without torsional stress.
First tighten the brake hose on the brake cover, then tighten connection on brake line.
Important:
Check routing and securing of brake-pad-wear indicator cable. Check for correct securing with tab of dust cap. It is absolutely essential to prevent the cable on the rim from being scuffed.