Fine-Grinding Both Sides of Both Front Brake Disks (Brake Disks Removed)

34 11 667 Fine-grinding both sides of both front brake disks (brake disks removed)





Important:
Always fine-grind both sides of both brake disks on one axle.
Observe Max machining dimension per friction ring side
Minimum brake disk thickness (MIN TH?
Surface roughness of brake surfaces.
Brake disks of M models (Compound brake disks) must not be machined!

Note: Only one brake lining set may be used up on brake disks which have been lathe-turned to minimum thickness (MIN TH).

Grinding machine, refer to BMW Service Workshop Equipment Planning documentation.
Follow the machine manufacturer's operating instructions.