51 14 003 Replacing BMW Badge On Side Direction Indicator

51 14 003 Replacing BMW Badge On Side Direction Indicator

Special tools required:
- 00 9 323

IMPORTANT: The Instructions on component cementing with double-sided adhesive tape serve as the basis for this repair instruction and must be observed without fail.







Heat badge (1) with hot air blower and detach with special tool 00 9 323.

NOTE: To assign the badge correctly to the left or right side direction indicator, it will be necessary first to fit the badge on the mounted side direction indicator.







Installation:
Position badge (2) over guides (3) and stick on.

Remove side direction indicator.
Press down badge (2) firmly on side direction indicator (1).