33 41... Detaching Wheel Bearing Inner Race From Drive Flange (Drive Flange Removed)

33 41... Detaching Wheel Bearing Inner Race from Drive Flange (Drive Flange Removed)


Special Tools Required:
33 1 307
33 4 400
33 4 401
33 4 402
33 4 403
33 4 404
33 4 405
33 4 406
33 4 407


NOTE: Detach wheel bearing inner race with special tool 33 4 400 through groove in wheel bearing inner race.






Position special tool 33 1 307 on drive flange.
Select one of the following special tools using the wheel bearing inner race and insert into special tool 33 4 401.
- 33 4 405 for dia. 45 - 51 mm
- 33 4 406 for dia. 50 - 55 mm
- 33 4 407 for dia. 55 - 61 mm

Screw in special tool 33 4 402 until tapered attachment of spindle comes into contact with specail tool 33 4 401.
Position special tool 33 4 401 with corresponding insert on groove of wheel bearing inner race.






Compress special tool 33 4 401 with wrenches 33 4 403 and 33 4 404 until special tool can still just be turned in groove.
Detach wheel bearing inner race by turning special tool 33 4 402.