Replacing Seal For Slide/Tilt Sunroof Lid At Rear

54 13 050 Replacing Seal For Slide/Tilt Sunroof Lid At Rear

Necessary preliminary tasks:
- Open glass slide/tilt sunroof

NOTE: Follow repair instructions for bonded seals on glass slide/tilt sunroof.







Detach seal (1) from slide/tilt sunroof lid.

Installation:
Clean bonding surface with adhesive remover (sourcing reference: BMW Parts Service).
Press seal without stretching (squashing).

IMPORTANT:
- Do not touch bonding surface. Surface temperature ≥ 20 °C
- Incorrect bonding of the seal will result in leakage.