Replacing Control Unit For Right Xenon Headlight (M3)

Replacing Control Unit For Right Xenon Headlight (M3)


WARNING:
Version with xenon headlights: Danger to life due to high voltage! Therefore disconnect all components from voltage supply before removal.
Work on the entire xenon lighting system (ignition unit, control unit and lamp) may only be carried out by specialist personnel.


Remove right headlight.







Loosen screws (1).
Remove control unit for xenon headlight (2) in direction of arrow from guides and place to one side.

Installation Note: Ensure correct cable routing.







Loosen screws (1).
Detach control unit for xenon headlight (3) from holder of control unit for xenon headlight (2) and remove.