Formats and Units of Measure without iDrive

Formats and Units of Measure

You can set formats and units of measure. The settings are stored for the remote control currently.






1) Lightly push button 1 in the turn indicator stalk up or down repeatedly until the symbol appears in the display accompanied by the word "SET".

2) Press button 2.






3) Use button 1 to select desired format or desired unit of measure.

4) Press button 2.

5) Use button 1 to make the setting.

6) Press button 2. The setting is stored.

Resetting to Factory Settings

You can reset the settings for formats and units of measure to factory settings. The settings are stored for the remote control currently in use.






1) Lightly push button 1 in the turn indicator stalk up or down repeatedly until the symbol appears in the display accompanied by the word "SET".

2) Press button 2.






3) Use button 1 to select "RESET".






4) Press button 2 until check icon is displayed. The settings are reset.